Z ELLERSTON has 1 Photos
Locations
Overmarine Group sells 43m motor yacht ...
Mangusta Yachts (part of Overmarine Group) has ...Similar Yachts
MOSAIQUE | From EUR€ 200,000/wk
Turquoise YachtsZ ELLERSTON Overmarine Mangusta (Rodriguez Group)
If you have any questions about the Z ELLERSTON information page below please contact us.
A General Description of Motor Yacht Z ELLERSTON
Being built by the Overmarine (Rodriguez Group) ship building company in Italy the Z ELLERSTON is 50 m 163 (foot) in length. Christened for 2008 the recent interior design and decor illustrates the creative modernity of the design work of Overmarine. Her old, former or build project names were Mangusta 165. She is able to reach a high speed of 40 knots.
Z ELLERSTON is the second yacht in the 165 series. She was built for an Australian owner as a replacement for his yacht called Z, a Mangusta 105 but was then sold.
The Construction & Naval Architecture of Luxury Yacht Z ELLERSTON
Overmarine was the naval architect involved in the professional vessel composition for Z ELLERSTON. Also the company Overmarine and Stefano Righini successfully collaborated on this venture. Interior designer Overmarine was employed for the internal internal ambience. In 2008 she was formally launched to triumph in Viareggio and following sea trials and detailing was afterwards delivered to the new owner. Overmarine (Rodriguez Group) completed their new build motor yacht in Italy. A fairly large feeling is achieved with a widest beam (width) of 9.2 metres or 30.18 ft. With a 1.6m (5.25ft) draught (maximum depth) she is fairly shallow. The material composite was used in the building of the hull of the motor yacht. Her superstructure above deck is created out of composite.
Main Engines And The Crusie Speed The M/Y Z ELLERSTON is Able To Achieve:
The 16V 4000 M90 engine installed in the motor yacht is made by MTU. Her propulsion units are tripple water jets. The engine of the ship produces 4556 horse power (or 3399 kilowatts). She is fitted with 3 engines. The sum power for the boat is thus 13668 HP / 10196 KW.
A List of the Specifications of the Z ELLERSTON:
| Superyacht Name: | Motor Yacht Z ELLERSTON |
|---|---|
| Ex: | Mangusta 165 |
| Built By: | Overmarine (Rodriguez Group) |
| Built in: | Viareggio, Italian |
| Launched in: | 2008 |
| Length Overall: | 49.9 metres / 163 feet. |
| Waterline Length: | 40.5 (132.87 ft) |
| Naval Architecture: | Overmarine and Stefano Righini, Overmarine Yacht Design Team |
| Designers Involved in Yacht Design: | Stefano Righini |
| Interior Designers: | Overmarine |
| Gross Tonnes: | 488 |
| Displacement: | 267 |
| Hull / Superstructure Construction Material: | composite / composite |
| Owner of Z ELLERSTON: | Unknown |
| Z ELLERSTON available for luxury yacht charters: | - |
| Is the yacht for sale: | - |
| Helicopter Landing Pad: | No |
| The Country the Yacht is Flagged in: | Italian |
| Class society used: | BV (Bureau Veritas) |
| Completed survey under Maritime & Coastguard Agency (MCA) Large Yacht Code: | Yes |
| The propulsion comes from three 4556 Horse Power or 3399 Kilowatts MTU. Model: | 16V 4000 M90 diesel. |
| Total engine power output 13668 HP /10196 KW. | |
| Approximate Cruise Speed is 36 knots. | |
| Her top Speed is around 40 knots. | |
| Range in nautical Miles is 600 at a speed of 36 knots. | |
| Fuel tanks: | 40337 L. |
| Fresh water: | 4000.00. |
| Beam: | 9.2m/30.18ft. |
| Waterline Length (LWL): | 40.5m/132.87ft. |
| Draught Maximum: | 1.6m/5.25ft. |
Z ELLERSTON Disclaimer:
The luxury yacht Z ELLERSTON displayed on this page is merely informational and she is not necessarily available for yacht charter or for sale, nor is she represented or marketed in anyway by CharterWorld. This web page and the superyacht information contained herein is not contractual. All yacht specifications and informations are displayed in good faith but CharterWorld does not warrant or assume any legal liability or responsibility for the current accuracy, completeness, validity, or usefulness of any superyacht information and/or images displayed. All boat information is subject to change without prior notice and may not be current.
Quick Enquiry
"From designing to construction of the mould and relative laminating in composite materials, to cutting of the metal sheets, to the final outfitting, including on-board electronics and on-board plant design, all processes are carried out by the Group. 100% made in Italy and absolute quality. The Group is based in Tuscany, Italy, with various production facilities in the areas of Viareggio, Massa and Pisa.: - Mangusta Yachts from Overmarine
