ACHILLES III J Samuel White Co

ACHILLES III was formerly named project/yacht name Santana. This 37 m (120 ft) ...

ACHILLES III J Samuel White Co

If you have any questions about the ACHILLES III information page below please contact us.

A General Description of Motor Yacht ACHILLES III

ACHILLES III was formerly named project/yacht name Santana. This 37 m (120 ft) luxury yacht was produced at J muel White & in 1956. Motor Yacht ACHILLES III is a well proportioned superyacht. The naval architecture office which delivered this yacht's design work in respect of this ship was Admiralty. Luxury yacht ACHILLES III is a quality yacht that can accommodate up to 8 people on board and has approximately 6 qualified crew.

The Construction & Designing for Luxury Yacht ACHILLES III

Admiralty was the naval architect involved in the professional vessel design work for ACHILLES III. Also the company Admiralty expertly worked on this venture. the United Kingdom is the country that J muel White & completed their new build motor yacht in. After formal launch in 1956 in Cowes she was afterwards handed over to the proud new owner having completed final finishing. The main hull was crafted from wooden. The motor yacht superstructure component is fabricated mostly with wood. With a width of 6.71 m / 22 ft ACHILLES III has reasonable room. A fairly shallow draught of 2.13m (7ft) limits the amount of overall harbours she can visit, depending on their specific characteristics. She had refit maintenance and changes carried out by 1998.

Engines & Speeds For M/Y ACHILLES III:

The 3508 engine installed in the motor yacht is produced by CATERPILLAR. Her propulsion units are twin screw propellers. The engine of the yacht gives 750 horse power (or 552 kilowatts). She is fitted with 2 engines. The total power for the yacht is thus 1500 HP / 1104 KW.

With Superyacht ACHILLES III There is The Following Passenger Accommodation Capacity For:

Apportioning room for a maximum of 8 visiting passengers spending the night, the ACHILLES III accommodates them in luxury. She also carries around 6 able qualified crew to maintain and sail.

A List of the Specifications of the ACHILLES III:

Superyacht Name:Motor Yacht ACHILLES III
Built By:J. Samuel White & Co. Ltd.
Built in:Cowes, United Kingdom
Launched in:1956
Refitted in:1998
Length Overall:36.58 metres / 120 feet.
Waterline Length:32 (105 ft)
Naval Architecture:Admiralty, Admiralty
Hull / Superstructure Construction Material:wooden / wood
Owner of ACHILLES III:Unknown
ACHILLES III available for luxury yacht charters:-
Is the yacht for sale:-
Helicopter Landing Pad:No
Material Used For Deck:beechwood
The Country the Yacht is Flagged in:Australian
Official registry port is:Southport
Home port:Melbourne, Australia
Max yacht charter guests:8
Number of Crew Members:6
The propulsion comes from two 750 HP / 552 Kilowatts Caterpillar. The Model type is 3508 diesel.
Overall output: 1500 HP /1104 KW.
Cruise Speed: 13 knots.
Top Speed: 15 knots.
Approximate range: 3000 at a speed of 10 knots.
Fuel Capacity: 27000 L.
Water: unknown.
Yacht Beam: 6.71m/22ft.
Waterline Length (LWL): 32m/105ft.
Draught at deepest: 2.13m/7ft.

Miscellaneous Yacht Details

Her deck material is predominantly a beechwood deck.

ACHILLES III Disclaimer:

The luxury yacht ACHILLES III displayed on this page is merely informational and she is not necessarily available for yacht charter or for sale, nor is she represented or marketed in anyway by CharterWorld. This web page and the superyacht information contained herein is not contractual. All yacht specifications and informations are displayed in good faith but CharterWorld does not warrant or assume any legal liability or responsibility for the current accuracy, completeness, validity, or usefulness of any superyacht information and/or images displayed. All boat information is subject to change without prior notice and may not be current.

Quick Enquiry

Similar Yachts

Share on FacebookShare on Twitter