CHARLY COPPERS has 1 Photos
Locations
Overmarine Group sells 43m motor yacht ...
Mangusta Yachts (part of Overmarine Group) has ...Similar Yachts
LOHANKA | From US$ 95,000/wk
HakvoortCHARLY COPPERS Overmarine Mangusta (Rodriguez Group)
If you have any questions about the CHARLY COPPERS information page below please contact us.
A Summary of Motor Yacht CHARLY COPPERS
CHARLY COPPERS was formerly called project/yacht name 130/01. This 40 m (130 ft) luxury yacht was produced at Overmarine (Rodriguez Group) in 2005. Motor Yacht CHARLY COPPERS is a good sized superyacht. The naval architecture office whom authored her drawings with respect to the yacht is Overmarine and Stefano Righini. The vessel had interior is the talent of Overmarine.
The Construction & Yacht Design relating to Luxury Yacht CHARLY COPPERS
Overmarine Yacht Design Team was the naval architect involved in the professional superyacht composition for CHARLY COPPERS. Also the company Overmarine and Stefano Righini expertly worked on this venture. Interior designer Overmarine was employed for the overall interior styling. Created at Overmarine (Rodriguez Group) this vessel was fabricated within Italy. She was successfully launched in Massarosa in 2005 before being transferred to the owner. Her core hull was crafted from composite. The motor yacht main superstructure is made predominantly from composite. With a beam of 7.8 m or 25.6 feet CHARLY COPPERS has moderate internal space. She has a reasonably shallow draught of 1.3m (4.5ft).
Engineering & Speeds For M/Y CHARLY COPPERS:
The 16V 4000 M90 engine powering the yacht is built by MTU. CHARLY COPPERS is propelled by twin water jets (kamewa). The engine of the yacht creates 3645 horse power (or 2720 kilowatts). She is equiped with 2 engines. The total power for the boat is therefore 7290 HP or 5440 KW.
Aboard Superyacht CHARLY COPPERS She Caters For The Following Passenger Accommodation For Guest:
With chambers for a maximum of 10 visiting passengers spending the night, the CHARLY COPPERS accommodates them luxuriously.
A List of the Specifications of the CHARLY COPPERS:
| Superyacht Name: | Motor Yacht CHARLY COPPERS |
|---|---|
| Ex: | 130/01 |
| Built By: | Overmarine (Rodriguez Group) |
| Built in: | Massarosa, Italian |
| Launched in: | 2005 |
| Length Overall: | 39.65 metres / 130 feet. |
| Naval Architecture: | Overmarine and Stefano Righini, Overmarine Yacht Design Team |
| Designers Involved in Yacht Design: | Stefano Righini |
| Interior Designers: | Overmarine |
| Displacement: | 148 |
| Hull / Superstructure Construction Material: | composite / composite |
| Owner of CHARLY COPPERS: | Unknown |
| CHARLY COPPERS available for luxury yacht charters: | - |
| Is the yacht for sale: | - |
| Helicopter Landing Pad: | No |
| Class society used: | BV (Bureau Veritas) |
| Completed survey under Maritime & Coastguard Agency (MCA) Large Yacht Code: | Yes |
| Max yacht charter guests: | 10 |
| The propulsion comes from two 3645 Horse Power / 2720 Kilowatts MTU. The Model type is 16V 4000 M90 diesel. | |
| Total engine power output 7290 HP /5440 KW. | |
| Cruising at a speed of 32 knots. | |
| Her top Speed is around 36 knots. | |
| Approximate range: | 520 at a speed of 32 knots. |
| Fuel tanks: | 24000 L. |
| Potable water capacity: | 3000.00. |
| Yacht Beam: | 7.8m/25.6ft. |
| Draught Maximum: | 1.3m/4.5ft. |
CHARLY COPPERS Disclaimer:
The luxury yacht CHARLY COPPERS displayed on this page is merely informational and she is not necessarily available for yacht charter or for sale, nor is she represented or marketed in anyway by CharterWorld. This web page and the superyacht information contained herein is not contractual. All yacht specifications and informations are displayed in good faith but CharterWorld does not warrant or assume any legal liability or responsibility for the current accuracy, completeness, validity, or usefulness of any superyacht information and/or images displayed. All boat information is subject to change without prior notice and may not be current.
Quick Enquiry
"From designing to construction of the mould and relative laminating in composite materials, to cutting of the metal sheets, to the final outfitting, including on-board electronics and on-board plant design, all processes are carried out by the Group. 100% made in Italy and absolute quality. The Group is based in Tuscany, Italy, with various production facilities in the areas of Viareggio, Massa and Pisa.: - Mangusta Yachts from Overmarine
Similar Yachts
LOHANKA | From US$ 95,000/wk
Hakvoort
NUMBER NINE | From EUR€ 75,000/wk
Carp Navi
LONE STAR | From US$ 99,000/wk
Hatteras