WANDA III has 1 Photos
Locations
Croatia
Croatia has increased in popularity markedly over ...
New Luxury Crewed Yachts Available for ...
There is a considerable amount of crewed motor ...Similar Yachts
OSCAR II | From AUS$ 80,000/wk
Australia Motor YachtWANDA III Polson Iron Works
If you have any questions about the WANDA III information page below please contact us.
A Summary of Motor Yacht WANDA III
The motor yacht WANDA III is a superyacht of well sized proportions. This 31 m (101 foot) luxury yacht was manufactured by Polson Iron Works in 1915. The firm of naval architecture which delivered the design in respect of the yacht is Edwin Trist.
The Build & Yacht Design relating to Luxury Yacht WANDA III
The yacht's general design work came from Edwin Trist. The professional naval architecture drawings are a products of Edwin Trist. Built by Polson Iron Works this vessel was built in the country of Canada. She was successfully launched in Toronto in 1915 before being delivered to the owner. A reasonable area is achieved with a maximum beam (width) of 3.66 m or 12 ft. With a 1.71m (5.6ft) draught (maximum depth) she is fairly shallow. The material steel framed wooden was used in the building of the hull of the motor yacht. Her superstructure over the hull is built out of wood.
M/Y WANDA III Engineering & Speed:
The yacht is engineered with a single reliable POLSON main engine(s) and can manage a top end speed of 10 knots. The main engine of the ship gives 200 horse power (or 147 kilowatts). Her total HP is 200 HP and her total Kilowatts are 147. Coupled to the WANDA III engines are a single screw propeller.
A List of the Specifications of the WANDA III:
| Superyacht Name: | Motor Yacht WANDA III |
|---|---|
| Built By: | Polson Iron Works |
| Built in: | Toronto, Canadian |
| Launched in: | 1915 |
| Length Overall: | 30.75 metres / 101 feet. |
| Waterline Length: | 28.71 (94.2 ft) |
| Naval Architecture: | Edwin Trist, Edwin Trist |
| Gross Tonnes: | 60 |
| Nett Tonnes: | 38 |
| Hull / Superstructure Construction Material: | steel framed wooden / wood |
| Owner of WANDA III: | Unknown |
| WANDA III available for luxury yacht charters: | - |
| Is the yacht for sale: | - |
| Helicopter Landing Pad: | No |
| Material Used For Deck: | wood |
| The Country the Yacht is Flagged in: | Canadian |
| Official registry port is: | Toronto |
| Home port: | Toronto, Canada |
| Main Engine(s) is one 200 Horse Power or 147 kW Polson. | |
| Giving the combined power of 200 HP /147 KW. | |
| Approximate Cruise Speed is 9 nautical miles per hour. | |
| Her top Speed is around 10 knots. | |
| Potable water capacity: | unknown. |
| Yacht Beam: | 3.66m/12ft. |
| Waterline Length (LWL): | 28.71m/94.2ft. |
| Draught Maximum: | 1.71m/5.6ft. |
Further Information On The Yacht
This motor yacht has a wood deck.
WANDA III Disclaimer:
The luxury yacht WANDA III displayed on this page is merely informational and she is not necessarily available for yacht charter or for sale, nor is she represented or marketed in anyway by CharterWorld. This web page and the superyacht information contained herein is not contractual. All yacht specifications and informations are displayed in good faith but CharterWorld does not warrant or assume any legal liability or responsibility for the current accuracy, completeness, validity, or usefulness of any superyacht information and/or images displayed. All boat information is subject to change without prior notice and may not be current.
Quick Enquiry
Similar Yachts
OSCAR II | From AUS$ 80,000/wk
Australia Motor Yacht
SUNCOCO | From EUR€ 34,000/wk
LOWLAND HOLLAND
DIAMOND GIRL | From US$ 47,000/wk
Johnson 103