THE FORGE Huber Boat Works
If you have and questions about the THE FORGE information page below please contact us.
A Summary of Motor Yacht THE FORGE
Coming from the Huber Boat Works shipyard in the United States the THE FORGE is 31 metre 103 (foot) in length. Superyacht THE FORGE is able to accommodate up to 10 guests with 1 professional crew. Her former names or project names are Tristan; Mephistopheles. She can reach a high speed of 22 knots.
The Building & Designing relating to Luxury Yacht THE FORGE
Dick Bolger was the naval architect firm involved in the professional vessel composition for THE FORGE. Also the company Dick Bolger and Huber Boat Works successfully worked on this venture. In 1975 she was actually launched with accolade in Beverly Ma and following sea trials and finishing touches was then handed over to the new owner. Huber Boat Works completed their new build motor yacht in the United States. The hull was built out of aluminium. The motor yacht superstructure is fabricated mostly using aluminium. The length of the luxury yacht on deck is 27.43 (90 ft). With a beam of 6.58 m or 21.6 ft THE FORGE has reasonable internal space. A fairly shallow draught of 1.52m (5ft) selects the amount of overall marinas she can visit, contingent on their individual depth. She had refit improvement and modification completed in 1994.
The Engineering And The Speed The M/Y THE FORGE Can Reach:
The 12V71TI engine powering the yacht is produced by GM. Connected to her GM engine(s) are twin screw propellers. The engine of the yacht produces 675 horse power (or 497 kilowatts). She is fitted with 2 engines. The total power for the boat is therefore 1350 HP or 993 KW.
On Superyacht THE FORGE There is Passenger Accommodation Capacity For:
Offering room for a limit of 10 visiting passengers spending the night, the THE FORGE accommodates everyone in luxury. The boat carries approx 1 professional crew members to operate.
A List of the Specifications of the THE FORGE:
|Superyacht Name:||Motor Yacht THE FORGE|
|Built By:||Huber Boat Works|
|Built in:||Beverly Ma, United States|
|Length Overall:||31.4 metres / 103 feet.|
|Waterline Length:||23.53 (77.2 ft)|
|Naval Architecture:||Dick Bolger and Huber Boat Works, Dick Bolger|
|Designers Involved in Yacht Design:||Huber Boat Works|
|Hull / Superstructure Construction Material:||aluminium / aluminium|
|Owner of THE FORGE:||Unknown|
|THE FORGE available for luxury yacht charters:||-|
|Is the yacht for sale:||-|
|Helicopter Landing Pad:||No|
|The Country the Yacht is Flagged in:||United States|
|Official registry port is:||Tampa Fl|
|Home port:||Tampa Fl, USA|
|Max yacht charter guests:||10|
|Number of Crew Members:||1|
|The propulsion comes from two 675 HP / 497 kW GM. Model:||12V71TI diesel.|
|Total engine power output 1350 HP /993 KW.|
|Approximate Cruise Speed is 17 knots.|
|Her top Speed is around 22 nautical miles per hour.|
|Range:||800 at a speed of 17 knots.|
|Fuel Capacity:||7570 L.|
|Potable water capacity:||3785.00.|
|Power generation:||Westerbeke 2 times 20 kilowatts.|
|Waterline Length (LWL):||23.53m/77.2ft.|
|Draught at deepest:||1.52m/5ft.|
THE FORGE Disclaimer:
The luxury yacht THE FORGE displayed on this page is merely informational and she is not necessarily available for yacht charter or for sale, nor is she represented or marketed in anyway by CharterWorld. This web page and the superyacht information contained herein is not contractual. All yacht specifications and informations are displayed in good faith but CharterWorld does not warrant or assume any legal liability or responsibility for the current accuracy, completeness, validity, or usefulness of any superyacht information and/or images displayed. All boat information is subject to change without prior notice and may not be current.