This sailing yacht JULIE MOTHER is a 30 metre 98 (foot) good sized wooden ship which was manufactured at Cantieri ngermani and conceived by Carlo Sciarrelli.
Carlo Sciarrelli was the naval architect firm involved in the professional vessel plans for JULIE MOTHER. Carlo Sciarrelli is also associated with the yacht general design work for this boat. Italy is the country that Cantieri ngermani built their new build sailing yacht in. After formal launch in 1978 in Lavagna the boat was handed over to the proud new owner following sea trials. A reasonable proportion is manifested with a widest beam (width) of 6.19 m or 20.3 feet. With a 3.26m (10.7ft) draught (maximum depth) she is deep. The material wooden was used in the building of the hull of the sailing yacht. Her superstructure over the hull is built out of wood.
For propulsion JULIE MOTHER has a single screw propeller. Her total HP is 498 HP and her total Kilowatts are 372.
Her Engine(s) is two 249 HP or 186 Kilowatts Yanmar. - Overall output: 498 HP /372 KW. - Fresh water: unknown. - Total Sail Size: 3294. - Beam: 6.19m/20.3ft. - Waterline Length (LWL): 26.24m/86.1ft. - Draught Maximum: 3.26m/10.7ft.
This sailing yacht has a teak deck.
The luxury yacht JULIE MOTHER displayed on this page is merely informational and she is not necessarily available for yacht charter or for sale, nor is she represented or marketed in anyway by CharterWorld. This web page and the superyacht information contained herein is not contractual. All yacht specifications and informations are displayed in good faith but CharterWorld does not warrant or assume any legal liability or responsibility for the current accuracy, completeness, validity, or usefulness of any superyacht information and/or images displayed. All boat information is subject to change without prior notice and may not be current.