HAMSA Overmarine Mangusta (Rodriguez Group)

If you have any questions about the HAMSA information page below please contact us.

A Summary of Motor Yacht HAMSA

The motor yacht HAMSA is a 32 metre 105 (ft) well proportioned composite ship which was produced from the keel up at Overmarine (Rodriguez Group) and conceived from the design board of Studio Bacigalupo and Stefano Righini. The well proportioned sports style yacht HAMSA is a very well designed Italian built superyacht which was launched to accolade in 2000. Accommodating 8 passengers and 4 qualified crew, motor yacht HAMSA was named Mangusta 105. The naval architecture office which delivered the design work for this ship is Studio Bacigalupo and Stefano Righini. She could be described as a modern sports style yacht.

Construction & Yacht Design for Luxury Yacht HAMSA

Studio Bacigalupo was the naval architect involved in the formal nautical composition for HAMSA. Studio Bacigalupo and Stefano Righini is also associated with the yacht general design work for this boat. In 2000 she was actually launched to accolade in Massarosa and following sea trials and detailing was then handed over to the owner who commissioned her. Overmarine (Rodriguez Group) completed their new build motor yacht in Italy. A moderate proportion is manifested with a maximum beam (width) of 6.61 metres or 21.7 ft. With a 1.2m (3.94ft) draught (maximum depth) she is reasonably shallow. The material composite was used in the building of the hull of the motor yacht. Her superstructure above deck is created from composite.

The Range & Speeds & Engines For M/Y HAMSA:

Installed with two MTU diesel main engines, HAMSA is able to reach a maximum speed of 35 knots. For propulsion HAMSA has twin water jets (kamewa). She also has an economical range of 430 miles whilst underway at her cruise speed of 31 knots. Her total HP is 4560 HP and her total Kilowatts are 3355.

The Accommodation Capacity On Aboard Superyacht HAMSA:

The well sized luxury yacht M/Y HAMSA is able to sleep up to 8 people in addition to 4 qualified crew.

A List of the Specifications of the HAMSA:

Superyacht Name:	Motor Yacht HAMSA
Ex:	Mangusta 105
Built By:	Overmarine (Rodriguez Group)
Built in:	Massarosa, Italian
Launched in:	2000
Length Overall:	32 metres / 105 feet.
Waterline Length:	26.5 (86.94 ft)
Naval Architecture:	Studio Bacigalupo and Stefano Righini, Studio Bacigalupo
Designers Involved in Yacht Design:	Stefano Righini
Gross Tonnes:	140
Displacement:	80
Hull / Superstructure Construction Material:	composite / composite
Owner of HAMSA:	Unknown
HAMSA available for luxury yacht charters:	-
Is the yacht for sale:	-
Helicopter Landing Pad:	No
Material Used For Deck:	grp-teak
The Country the Yacht is Flagged in:	St Vincent & Grenadines
Official registry port is:	Kingstown
Home port:	Fort Lauderdale, USA
Class society used:	ABS (American Bureau of Shipping)
Max yacht charter guests:	8
Number of Crew Members:	4
The propulsion comes from two 2280 Horse Power / 1678 Kilowatts MTU. The Model type is 16V 396 TE94 diesel.
Total engine power output 4560 HP /3355 KW.
Cruise Speed:	31 knots.
Top Speed:	35 knots.
Range:	430 at a speed of 31 knots.
Bunkering capacity:	14000 L.
Fresh water:	2000.00.
Generators:	2 times 30 kilowatts.
Beam:	6.61m/21.7ft.
Waterline Length (LWL):	26.5m/86.94ft.
Draught at deepest:	1.2m/3.94ft.
Yacht Type:	sports style yacht.

Further Information On The Yacht

Her deck material is predominantly a grp-teak deck.

HAMSA Disclaimer:

The luxury yacht HAMSA displayed on this page is merely informational and she is not necessarily available for yacht charter or for sale, nor is she represented or marketed in anyway by CharterWorld. This web page and the superyacht information contained herein is not contractual. All yacht specifications and informations are displayed in good faith but CharterWorld does not warrant or assume any legal liability or responsibility for the current accuracy, completeness, validity, or usefulness of any superyacht information and/or images displayed. All boat information is subject to change without prior notice and may not be current.

Quick Enquiry

"From designing to construction of the mould and relative laminating in composite materials, to cutting of the metal sheets, to the final outfitting, including on-board electronics and on-board plant design, all processes are carried out by the Group. 100% made in Italy and absolute quality. The Group is based in Tuscany, Italy, with various production facilities in the areas of Viareggio, Massa and Pisa.: - Mangusta Yachts from Overmarine

The 32m Yacht HAMSA