Multiplast Composite Yachts completed sailing yacht GROUPAMA III in 2006. The yacht is built within France. GROUPAMA III had her naval architecture and design developed by Marc Van Peteghem and Vincent Lauriot-Prevost and Marc Van Peteghem. Ready for launch for 2006 the recent interior design and decor reveals the integrity of Gilles Ollier Design Team.
Marc Van Peteghem was the naval architect firm involved in the professional nautical plans for GROUPAMA III. Also the company Marc Van Peteghem and Vincent Lauriot-Prevost skillfully collaborated on this undertaking. Interior designer Gilles Ollier Design Team was employed for the internal internal styling. Created at Multiplast mposite Yachts this vessel was fabricated in France. She was successfully launched in Vannes in 2006 before being transferred to the owner. A very beamy feeling is manifested with a total beam (width) of 22.5 m / 74 ft. With a 5m (16.5ft) draught (maximum depth) she is deep. The material composite was used in the building of the hull of the sailing yacht. Her superstructure over the hull is fashioned from composite.
The 12V 2000 M60 engine powering the yacht is made by MTU. She is driven by twin screw propellers. She is equiped with 2 engines.
Engine Model: 12V 2000 M60 diesel. - Cruising at a speed of 22 knots. - Water: unknown. - Beam: 22.5m/74ft. - Draught at deepest: 5m/16.5ft.
She has a grp deck.
The luxury yacht GROUPAMA III displayed on this page is merely informational and she is not necessarily available for yacht charter or for sale, nor is she represented or marketed in anyway by CharterWorld. This web page and the superyacht information contained herein is not contractual. All yacht specifications and informations are displayed in good faith but CharterWorld does not warrant or assume any legal liability or responsibility for the current accuracy, completeness, validity, or usefulness of any superyacht information and/or images displayed. All boat information is subject to change without prior notice and may not be current.